• On a soft surface, lay out the adjustable frame, on the floor, in front of the window with hinges
pointing toward you
• Using the labels on each frame, lay out the adjustable frame in the following sequence, as
shown in figure
1(A):
T – Top, L – Left, B – Bottom, R – Right
NOTE:
Hinge pin ‘holes’ need to be in an upward position.
1(A)
L
T
B
R
• Assemble the adjustable frame corners by sliding the locking key into
position at the back of the frame, as shown in figure
2(A)
• Clip the corner covers onto the adjustable frame, as shown in figure
2(B)
NOTE:
These images are showing the back face of the shutter.
STEP 1
STEP 2
BACK VIEW OF FRAME
Locking
Key
Make sure
edges are flush
2(A)
BACK VIEW OF FRAME
2(B)
BACK VIEW OF FRAME
