Easy Travel Elite, Руководство по обслуживанию

Страница: 11 / 46

EasyTravel Elite – ET1E – Service Manual Rev. 0404 11
Kit Number E0-00-1-115 (S-Drive Controller)
Tools:
Phillips #2 Screwdriver
Pliers
REMARK: The S-Drive controller can be fit-
ted on a unit that originally was issued with a
Solo controller; this will require a new Inter-
face Circuit Board, E0-00-1-116
1. Remove Controller Cover, see instruc-
tion 3.3
2. Detach wiring from Controller (7a-A)
3. Remove Controller (7a-A) by unscrew-
ing Screws (7a-B)
4. Secure new Controller to Column Frame
with Screws (7b-A)
5. Attach Wires to Controller: from Battery
Contacts Assembly (E): the red wire to
“B+” tab, the black to “B-“ tab; the Con-
nector from the Interface Circuit Board
(B); the two white wires (C) to the white
and green/yellow cables from Power
Cable (C); from Power Cable (D) the red
wire to “M+” tab, the black to “M-“ tab
6. Secure Controller Cover to Column
Frame, ensure that no wires will be
pinched or damaged by the Cover or the
Screws
7. Check drive, brake and freewheel op-
eration
Figure 7a
Figure 7b