Stud Sensor
PT190306001
Please read the instruction manual carefully, and follow the
instructions contained in them. Get to know the appliance , its
correct use and the safety instructions with the assistance of
these instructions for use.
Know Your Apparatus:
This device is used to find wooden or metal studs through drywall boards.. It can
detect live wires.
Specification:
Battery power:
9V DC
Depth of detecting electrical wiring
50mm
Depth of detecting metal
30mm
Depth of detecting wood
19mm
Operating temperature
-2
0
C ~ 45
0
C
Operating humidit
80%RH
Position accuracy
3mm
Special Safety Instruction of use:
When using battery-powered tools, basic safety precautions, including the
following, should always be followed to reduce the risk of fire, leaking
batteries, personal injury and material damage.
Never attempt to open the battery for any reason.
Do not store the battery in locations where the temperature may exceed
40
0
C.
When disposing of batteries, follow the instructions given in the section”
protecting the environment”
Do not incinerate batteries.
Under extreme conditions, battery leakage may occur, when you notice
liquid on the batteries, proceed as follows: carefull
y
wipe the liquid off
using a cloth. Avoid skin contact.
Protecting the environment
