Easy-Laser XT11, Руководство пользователя

Страница: 52 / 81

A. This measurement has been adjusted.
B. The view "As left" is active.
Quality assessment
The quality assessment is a sum of the following quality factors:
Attainable accuracy
The maximum accuracy that can be attained. Many measurement points that also have a good spread, will statistically
ensure a high accuracy.
Acquired accuracy
Actual accuracy of the measured values from the units. If the acquired accuracy is low, it may depend on for example
air turbulence or bearing clearance.
Temperature stability
Measured temperature variation in the measuring units. If the stability is low, remeasure when the temperature has sta-
bilized.
Measurement direction
Indicates the consistency in your measurement direction. It is better to move the measurement units in the same dir-
ection during the entire measurement. A low value indicates the direction has changed during measurement, which
may hurt the measurement quality.
52
HORIZONTAL