manualshive.com logo in svg

Eastwood Versa-Cut12740, Руководство по сборке и эксплуатации

Поделиться
Скачать
Eastwood Versa-Cut12740 Скачать руководство пользователя страница 3

To order parts and supplies, call 1-800-345-1178 or visit www.eastwood.com 

3

SAFETY INFORMATION

FLAMMABILITY HAZARD 

•  Before beginning, make sure the work surface is cleaned of any oils, coatings or other materials which 

can ignite and or emit dangerous fumes or vapors.

•  Molten metal is ejected away from the cutting area with signifi cant force and speed. Make sure the 

entire work area is clear from fl ammable or easily damaged materials or objects.

HIGH VOLTAGE DANGER 

The unit contains no user serviceable parts! Contact with the torch when the button is depressed will 
result in a serious shock and severe burns! 
This device also produces High-Frequency, Radio-Frequency Emissions which can damage sensitive 
electronic equipment in the area. Keep all cell-phones, cameras, watches and other electronic equipment 
at least 6’ away from the Power Unit and Torch. 

IMPORTANT NOTE:

 If you have a medical condition or pacemaker check with your doctor before using 

as the RF emissions may cause interference.  

ELECTRICAL SAFETY DO’S 

•  Make sure you, your work area, and your equipment are dry. 

•  If you are using an extension cord (not recommended), make sure it is a grounded cord in sound 

condition with no damage or frays, and of the correct wire gauge (minimum 12 Gauge @ 25’ maximum 
length).

•  Ensure that proper sized circuit breakers and wiring are in place prior to use: 15 amp for 110 volt 

operation and 30 amp for 220 volt operation.

 

ELECTRICAL SAFETY DON’TS 

•  Never bypass the ground plug. Grounding is necessary for proper operation of the unit and 

reduces shock hazard. 

•  Do not touch the torch tip until after the activation switch is off and the unit is UNPLUGGED.
•  Do not use the unit if any component should become damaged or show signs of excessive wear.

Содержание Versa-Cut12740









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды