Eastwood MIG 175, Руководство по сборке и эксплуатации

Страница: 5 / 12

To order parts and supplies, call 1-800-345-1178 or visit www.eastwood.com 5
COMPONENTS AND CONTROLS
1. Gun torch access hole.
2. Opening for ground cable.
3. Power switch.
4. Potentiometer knob.
5. Wire speed, feed rate adjust knob.
6. Latch.
7. Power Cord.
8. Reset overload protective device –
the protector will cut off the circuit if
the welding machine is in excess of
the maximum load, after which the
switch must be manually reset.
9. Shielding gas inlet fi tting.
10. Wire feed tension roller.
11. Wire spool mount spindle.
12. Wing screw to fasten the welding torch cable.
13. Positive (+) and negative (-) output terminals.
FIG. B FIG. B
7
9
11
13
12
10
8
4
3
5
1
2
6