4
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
SET-UP
• Select the Inlet Adapter with either the
with 39.4” (1 m) x 0.38” (9.8mm) Nylon
Tube or Inlet Adaptor with 59” (1.5 m) x
0.31” (8mm) Silicone Hose.
• Insert the selected Inlet Adapter into the
Inlet/Spout at the top of the Evacuator by
pushing in firmly until seated then turn
15° Counter-Clockwise to lock into
position
(FIG 1)
.
FOR FLUID EXTRACTION
• Determine which Nylon Tube best fits into
the dipstick tube or other orifice being
accessed.
• Using the appropriate Tube Connector,
slip both Nylon Tubes into the Tube
Connector until seated
(FIG 2)
.
FOR BRAKE BLEEDING
• Place the 90° Brake Bleeder Attachment
with Silicone Hose over the brake bleeder
(FIG 3)
.
The Nylon Tube end must
be clean and free of burrs,
nicks or other damage to
properly seal.
FIG. 1
FIG. 2
FIG. 3