Eastwood 51460 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 20

Eastwood 51460 Скачать руководство пользователя страница 3

To order parts and supplies: 800.343.9353 >> eastwood.com

3

INJURY HAZARD!

• Do not apply excessive force to Buff Motor while in use. Always make sure

the workpiece or material being cut is held securely and work is done only in
the lower front “Work Zone” quadrant of the Buff Wheel

(FIG 2)

.

• Operating Buff Motors can quickly and violently propel a workpiece at over

80 MPH while operating causing injury and or property damage. Always
wear a face shield and ANSI approved eye protection when buffing to protect
face and eyes.

• A rotating Buff Wheel can quickly catch loose clothing, long hair, or jewelry

causing serious personal injury. Keep all loose clothing, long hair, and
jewelry away from operating Buff Motor.

• Rotating Buff Wheels can cause burns and abrasions if contacted by bare

flesh. Do not touch rotating Buff Wheels. Always wear thick, well-fitting
leather gloves and arm protection when buffing.

• A damaged Buff Wheel can disintegrate at high speed causing personal

injury or property damage. If excessive vibration is felt, discontinue use
immediately and disconnect tool from electrical supply. Inspect Buff Wheel
or Motor for damage. Do not resume use until resolution is found.

• Buff Motors can quickly start up when handling while plugged in to electrical

supply causing serious personal injury. Always unplug Buff Motor from the
electrical supply before changing Buff Wheels or performing maintenance.

INJURY HAZARD – DO NOT USE

GRINDING WHEELS ON THIS BUFF MOTOR!

• This Buff Motor is designed for use only with Fabric Buff Wheels and does

not have the shaft support or necessary guards to protect the operator form
solid debris or shattering grinding wheels.

BURN HAZARD!

• Applying excessive pressure against a wheel while buffing can rapidly build

heat in an object and cause burns and damage to the object. Do Not apply
excessive pressure while buffing.

• This Buff Motor will eject a trail of grit, fibers and debris at high speed

which can injure others nearby. Keep all persons and pets away from
the work area.

«
1
2
3
4
5
...
»

Содержание 51460





















Отзывы:

Нет отзывов