CARE & MAINTENANCE
• It is extremely important that the air supply be clean and dry. A separate
moisture trap, water/oil separator or desiccant system should be used. The
Versa-Cut 60 Plasma Cutter has a built-in “last-chance” moisture separator
which requires draining each time you have completed work with the unit. This
feature is located on the underside rear corner and is drained by keeping the
unit level and gently pulling down on the drain fi tting
(FIG. E)
.
•
Constantly inspect the torch nozzle for excessive erosion, molten metal ac-
cumulation or burning. If damaged, it must be replaced.
• Before each use, inspect ALL electrical connections, cables, supply line, torch,
air supply, housing and controls for damage. If any damage or wear is noted,
DO NOT USE THE UNIT.
• Always store the unit in a safe, clean and dry environment.
TORCH MAINTENANCE
The Eastwood Versa-Cut 60 Plasma Cutter has a number of consumable parts that
will need to be replaced over time. If wear or slag build up is noticed on any of the
torch components, replace them immediately to avoid damage to the torch. Worn
components will also contribute to poor cutting and diffi cult arc starting. See the torch
components
(FIG. F)
exploded view for a reference of all of the components and the
assembly order.
To order parts and supplies: 800.345.1178 >> eastwood.com
7
FIG. E
FIG. E
FIG. F
FIG. F
Electrode
Air
Diffuser
Nozzle
External
Nozzle
Torch Assembly
