background image

4

 

Eastwood Technical Assistance: 800.343.9353  >>  [email protected]

 

INJURY HAZARD!

•  This tool has high-speed, highly abrasive cutting surfaces which can quickly 

cause severe injury. Keep fingers and hands away from moving parts when 
operating. Wear thick, well-fitting work gloves and keep loose clothing, 
sleeves, cords, jewelry and hair away from moving parts.

•  Always turn off Power Switch and disconnect tool from electrical supply 

when breaking off tungsten tips to prevent pieces of tungsten from falling 
into and being ejected from cutting area and potential severe injury.

•  DO NOT exert excess force on Tungsten while grinding as it can break and 

suddenly eject sharp pieces at high velocity.

•  Always turn off Power Switch and disconnect tool from electrical supply 

when flipping or changing Grinding Wheels to prevent accidental tool starting 
and potential severe injury.

•  This tool could eject a trail of sparks at high speed which can ignite  

flammable materials or injure others nearby. Do not operate near flammable 
materials and keep all persons and pets away from the work area.

•  Always hold the tungsten with open fingers while grinding as it can  

suddenly kick back causing hand puncture wounds. Wear thick,  
well-fitting work gloves.

•  Always make sure the tool is securely held to avoid sudden movements 

which could result in injury.

•  Frequently inspect Grinding Wheel and tool condition. If cracks or chips  

develop, discontinue tool use immediately and replace damaged Wheel. 
ONLY USE replacement Wheels rated at 40,000 RPM or greater. Severe 
injury can result in the event of Grinding Wheel failure.

 

VIBRATION INJURY HAZARD!

•  This tool will vibrate during use! Repeated exposure to vibration may  

cause physical injury.

 

•  Use care not to cover motor cooling slots with a gloved hand while  

in operation to avoid overheating.

Содержание 33307













Отзывы: