6
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
CHARGING
• Push ON/OFF Button partially
to obtain a battery power level
reading
(FIG 2)
.When fully
charged, three Green and one
Amber indicator lamp will
illuminate. The number of
illuminated LED’s will decrease
from four to one as the charge
depletes.
• When the Lamp fails to il-
luminate and/or the 4 (Green
and Amber) LED charge level
indicators at the rear of the
Power Unit do not illuminate, a
charge is required.
- Flip up rubber seal and
plug the Micro USB
terminal of included Wall
Charger into rear of Power
Unit
(FIG 3
).
- Insert the USB plug into
the USB port of the
Wall Charger.
- Plug wall unit into properly grounded 120 VAC, 60 Hz. Outlet.
- Amber and Green LED’s will illuminate and a Green one will flash to indicate charging
(FIG 3)
.
- Allow 4 hours for full charge.
- The array of 4 LED’s at the rear of the Housing will all illuminate to indicate full charge.
- Close the rubber Charging Port Cover.
CHARGING WHILE IN USE
The Lamp may be used while charging, however it will greatly extend the
required charging time.
FIG. 3
On/Off
FIG. 2
✓
✓
Battery
level