background image

2

 

Eastwood Technical Assistance: 800.343.9353  >>  [email protected]

The 

EASTWOOD 3/8” IMPACT AIR RATCHET

 offers high performance in a compact, soft-grip,  

lightweight aluminum housing that fits in the tightest areas. It features a powerful, four-vane,  
ball bearing motor with an efficient twin-hammer drive. Includes forward and reverse with an  
infinitely variable throttle control.

CONTENTS

(1)

  Right Angle, 3/8” Square Drive  

Pneumatic Ratchet

(1)

  1/4” MNPT, Male M-type  

Quick Disconnect Inlet Fitting

SPECIFICATIONS

• 

Square Drive:

 

3/8” with Ball Detent

• 

RPM:

 

700 free speed

• 

Maximum Torque:

 45 ft-lbs [61 N-m]

• 

Air Consumption:

  3.1 CFM [87.8 L/m] @ 90 PSI

• 

Inlet thread size:

  1/4” FNPT

• 

Reversible, Variable Speed, 4 Vane, Ball Bearing Air Motor

 

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, 
could result in minor or moderate injury.

 

NOTICE is used to address practices not related to personal injury.

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling, and on all other information 
provided with this product:

Содержание 31753









Отзывы: