8
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
OPERATION
• Line up your planned cut-line with the center of the “V” notch in the leading edge of the Base
Plate
(FIG 1)
.
NOTE:
the “V” notch is directly in line with the Blade.
• While holding the Saw securely in two hands, depress the Trigger Safety Lock Button located
on the left side of the Saw body, immediately above the Trigger Switch
(FIG 3),
then depress
the Trigger Switch to start the saw motor.
• To begin cutting, allow several seconds for the motor to reach full speed then gently feed the
leading edge of the blade into the workpiece. The Blade Guard which is spring-loaded will
automatically be pushed back by feeding into the workpiece and will only expose the portion of
the blade required to cut through the material.
• Slowly and steadily allow the blade to do the cutting.
• When the cutting is complete, release trigger and allow blade to stop rotating before pulling the
blade away from the workpiece.
DO NOT interfere with Blade Guard function or severe injury may occur!
DO NOT force the Saw forward blade or kickback could quickly occur
causing severe injury!
✓
FIG. 3
Trigger Safety Lock Button
“On/Off” Trigger
Base Plate
✓
✓
Содержание 31664
Страница 1: ...MINI METAL SAW INSTRUCTIONS Item 31664...