© Copyright 2019 Easthill Group, Inc. 3/19 Instruction item #30650Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: [email protected]
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
FOLDING FOR STORAGE
1.
Place the Saw Horse upside-down with the top rail resting on a flat, clean and level
floor surface.
2.
Remove wing-nuts and carriage bolts to shorten legs to fully retracted, storage length.
Replace carriage bolts and wing nuts.
3.
Pull each set of legs inward toward each other to clear the built-in vinyl coated lock tabs.
4.
Rotate both sets of Legs 90° downward and nest them into the underside of the top rail.
5.
Wrap the hook & loop closure retaining strap around the folded Saw Horse assembly
for transport.
