To order parts and supplies: 800.343.9353 >> eastwood.com
9
• To begin drilling, allow several seconds for the motor to reach full speed then gently feed the
drill bit into the workpiece.
• Slowly and steadily allow the rotating bit to do the drilling.
• When the drilling is complete, release trigger and allow the drill to stop rotating before pulling
the drill bit away from the workpiece.
• The Forward and Reverse feature is activated by shifting the Lever located at the upper edge of
the Trigger to the Left to rotate the Drill Clockwise (as viewed from the Drill Handle) and to the
Right to rotate it in a Counterclockwise direction (as viewed from the Drill Handle)
(FIG 3)
.
MAINTENANCE
IMPORTANT NOTE:
The following maintenance should be performed before each use:
• Inspect Chuck for looseness or premature wear
• Clean dirt and debris from Chuck Jaws
• Clean dirt and debris from motor air cooling slots
To avoid hand fatigue, this Drill features a Trigger Position Lock which
functions on full speed only. To engage it, depress the Trigger fully then
push in the Trigger Lock Button located on the left side of the Handle adjacent
to the Trigger (Fig 3). To release it, simply depress the Trigger once again.
DO NOT force the Drill forward or kickback could quickly occur causing
severe injury!
