To order parts and supplies: 800.345.1178 >> eastwood.com
9
BLADE REPLACEMENT
1.
Note the orientation of the blade set before disassembly. The replacements must be installed
in the same orientation for proper function.
2.
Remove upper and lower shear blades.
3.
Install new shear blades and set blade gap (See section: Setting Cutting Blade Gap).
4.
Test for proper operation of shear.
BRUSH REPLACEMENT
1.
Loosen and remove Brush caps located
on the sides of the tool
(FIG 4)
.
2.
Remove old brushes and install new
brushes in the same orientation.
3.
Install Brush caps
4.
Connect tool to appropriate power
source and test for correct operation.
Allow tool to run for two minutes, this
will allow the new brushes to seat.
MAINTENANCE
• Apply several drops of light machine oil occasionally to moving contact surfaces.
• Add 3-4 drops of light machine oil after each use to the oil port located on the top of the Tool.
Unplug tool before making any adjustments or repairs.
Unplug tool before making any adjustments or repairs.
FIG. 4
✓
Brush Cap
✓
Brush Cap
