© Copyright 2018 Easthill Group, Inc. 8/18 Instruction item #20269Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: [email protected]
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
ADDITIONAL ITEMS
#51088
Shrinker/Stretcher Set
#13475
Eastwood Electric Metal Shears
#11797
Throatless Shear
#14042
Versa Bend Sheet Metal Brake
#20254
Eastwood 24” Slip Roll
SET UP AND OPERATION
• Follow the specific model Bead Roller
Instructions for complete Bead Roller set-
up and operation. If the Instruction Manual
originally supplied with an Eastwood Bead
Roller is unavailable, contact Eastwood at
www.Eastwood.com or call 1-800-345-
1178 to request a replacement.
• Install Dies so that the outer edge of the
flare of the Positive Die just meets the
stop face of the Negative Die
(FIG 1)
.
• Adjust the spacing between the Dies to
allow for the gauge of metal to be formed
(FIG 2)
.
• Slowly feed the metal panel between the
Dies keeping the edge firmly against the
stop face of the Negative Die
(FIG 3)
.
STORAGE
• Apply a thin film of light oil or rust-
preventive to all bare steel areas.
• Store in a clean, dust-free, dry, dampness-
free area, preferably covered with plastic.
FIG. 1
FIG. 2
FIG. 3
Positive
Die
Negative
Die
Stop
Face
✓
Содержание 20269
Страница 1: ...RADIUS EDGE DIES INSTRUCTIONS Item 20269 ...
