2
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
Welding Helmets
are specifi cally designed to
provide maximum eye and face protection from
harmful UV and IR radiation emitted when
welding, in a lightweight, comfortable housing.
Auto-Darkening lens and mask meets
ANSI Z-87.1 safety standards.
READ INSTRUCTIONS!
Thoroughly read and understand
this instruction manual before use.
CAUTION!
• Welding helmets are designed to protect the user’s eyes and face from harmful
radiation, sparks and splatter under normal welding conditions. They are not
intended to offer protection against impact hazards, explosions or corrosive liquids.
Wear appropriate eye protection under helmet to provide impact protection.
• Always test auto-darkening feature before each use by quickly subjecting the face
of the welding helmet to sunlight, the sparks from a fl int torch igniter, or other
bright light source. If the auto-darkening feature fails to function discontinue use
immediately and have the helmet checked by a qualifi ed technician.
• Indirect arc fl ash or the fl ash from low current TIG welding may not trigger
the auto darkening feature. This could expose the user to harmful
radiation. Discontinue use if the auto-darkening feature does not function
in your specifi c application.
• The operating temperature range of the auto-darkening feature is 23F to 130F
(-5C to 55C). The response time may be affected beyond the described
temperatures causing an unsafe condition. Do not use beyond the recommended
operating temperature range.
• Keep the helmet lens clean to ensure proper operation. Clean according to
instructions contained in this manual. Do not immerse the lens in water.
• Do not place the helmet lens on a hot surface.
• Do not modify the helmet or use it for unintended purposes.
•
Failure to follow the aforementioned warnings and operating instructions
can result in permanent eye damage or blindness.
SAFETY INFORMATION
20 AMP
40 AMP
80 AMP
100 AMP
125 AMP
150 AMP
175 AMP
200 AMP
MIG
9
10
11
11
11
11
12
13
TIG
10
11
11
11
12
13
13
13
STICK
9
10
11
11
11
11
12
13
FLUX
CORE
–
–
10
11
11
12
13
13
T
YP
E O
F W
EL
D
IN
G
AMPS
WELDING HELMET SHADE SETTING CHART
PRODUCT SPECIFICATIONS
#13203
#13212
#14425
Light Shade
4
Dark Shade
9-13
Switching Time
<0.04mS
Viewing Area
3.6" x 1.7"
3.6" x 1.7"
3.6” x 1.7"
Delay Time
0.15 - 0.8 sec
Arc Sensors
2
Power Supply
Li-Mn & Solar
Weight
1.08 lbs
Operating Temp.
23-131˚F