INSTALLATION INSTRUCTIONS
14
January 1996 – 990602
Locating the DATE DIP SWITCHES
[7] To select the month-day-year format, to set 02-28-
93, for example:
(a) DIP SWITCH 1 to ON and
(b) DIP SWITCH 2 to OFF
[8] To select the day-month-year format, to set 28-
02-93, for example:
(a) DIP SWITCH 1 to OFF and
(b) DIP SWITCH 2 to ON
[9] To select the year-month-day format, to set 93-02-
28, for example:
(a) DIP SWITCH 1 to ON and
(b) DIP SWITCH 2 to ON
[10] Connect the RIBBON CABLE to the CPU BOARD,
and place the COVER on the ID CAMERA.
[11] Turn the ID CAMERA on its side.
[12] Install the 3 SCREWS, and the 6 SCREWS and
POWER SWITCH COVER PLATE removed
earlier.
[13] Turn the ID CAMERA upright.
[14] Energize the ID CAMERA while holding the
DENSITY DECREASE BUTTON. This will reset
the microprocessor.
Selecting the Time Format
SWITCHES 1 and 2 of SW2 control the time format.
Warning
Dangerous Voltage.
H139_0033CC
DP SW1
O
F
F
1
2
3
4
5
6
7
8
SW2
H139_0033CCA
BOARD
CPU
DATE DIP SWITCHES