EASTMAN Kodak X-Omat 5000 RA, Руководство оператора

Страница: 52 / 88

OPERATORS MANUAL
52 May 1997 – 5B6729
Procedure for Setting Timer2 Initially
[1] Press the “TIMER2 CONTROL” key.
[2] Repeat Steps 10 through 16 starting on Page 50 to set the on and off times for Timer2. Then set the on and
off times for the remaining days of the week by completing the steps on the next page.
Procedure for Setting the On and Off Timers for the Remaining Days of the Week
Introduction
If the hours that you would like to operate the Processor on the other days of the week are the same hours as those
you set for Monday, follow Steps
1 through 3 below.
If you do not want to repeat Monday’s on and off times for the other days of the week, follow Steps 4 through 13 .
Copying On and Off Timer Settings:
[1] Press the “NEXT DAY” key to advance the display to show Tuesday.
[2] Press the “COPY PREV” key. You will hear a beep when you press the “COPY PREV” key.
[3] Repeat the entire process to set the Automatic Timers for the remaining days of the week.
Setting Different On and Off Times for the Remaining Days:
If you want to select different on and off times for Timer1 and Timer2 than those you set for Monday, do the steps
below.
[4] Press the “NEXT DAY” key to advance the display to show Tuesday.
[5] Press the “TIMER1 CONTROL” key.
[6] Press the “ON” key to enable Timer1.
PRESS BUTTON TO SET UP FOR MONDAY
TIMER1
CONTROL
TIMER2
CONTROL
COPY
PREV
NEXT
DAY
DONE/
RETURN
PRESS BUTTON TO SET UP FOR MONDAY
TIMER1
CONTROL
TIMER2
CONTROL
COPY
PREV
NEXT
DAY
DONE/
RETURN
PRESS BUTTON TO SET UP FOR TUESDAY
TIMER1
CONTROL
COPY
PREV
NEXT
DAY
DONE/
RETURN
PRESS BUTTON TO SET UP FOR MONDAY
TIMER1
CONTROL
COPY
PREV
NEXT
DAY
DONE/
RETURN
PRESS BUTTON TO SET UP FOR TUESDAY
TIMER1
CONTROL
COPY
PREV
NEXT
DAY
DONE/
RETURN