Eastey Perfomance EN Series, Руководство пользователя

Страница: 13 / 40

Installation 13
Installation
Lift the machine up and off of the shipping pallet.
CAUTION! The EM series L-sealer is heavy and will require a forklift,
floor crane, or several people to move safely off the shipping
pallet. Use proper equipment when lifting the L-sealer and
ensure it is secure and will not shift while being moved off
the shipping pallet.
Place the sealer in the desired location with the required electrical power source
available. (See power requirements for the specific model in the Specifications table.)
Make sure the electrical wiring is adequate to provide the required voltage. If the voltage
provided is too low, the equipment will not operate correctly.
Selecting the proper location is one of the most important considerations for initial
setup. When selecting the location, take into consideration the following factors.
1. Adequate power supply nearby?
2. Where is the sealer in relation to the power source?
3. Where is the sealer in relation to the tunnel and any conveyor(s) necessary to
move the wrapped product? (Alignment with packaging line.)
4. Convenience for the operator.
If there is any doubt, get qualified assistance with your initial installation.
Location Requirements
When installing the L-sealer please be aware of the following considerations:
1. The surface on which it is located is flat and level.
2. Conveyor or packing table height.
3. Alignment with packaging line.
When the L-sealer is positioned in the operating location you will need access to:
1. Control panel switches: On/Off switch, dwell timer, conveyor timer.
2. Height and width adjustments.
3. Film unwinder.