Eastey BB-2T, Руководство пользователя

Страница: 28 / 42

28 Troubleshooting
Troubleshooting
Problem Solution
Machine is not operating
•
Machine has inadequate electrical power or
power is not connected. Verify system power
meets specification requirements.
•
An Emergency Stop condition exists. Clear
the machine and reset the Emergency Stop.
Machine cannot tape cartons
• The height or width adjustments are not set
correctly for the box size. See Adjustments
section to make adjustments for box size.
Uneven Tape Leg on Front
• Tape tension is too low. Tighten the one-way
clutch roller and/or the tape core.
• Adjust the one-way clutch roller in the slot so
it is slightly beyond the front wipe roller.
•
Adjust the tape leg length. See Tape Leg
Adjustment section.
Uneven Tape Leg Rear
•
Too much tape tension. Adjust the one-way
clutch and or tape core.
•
Clean and ensure all rollers move freely.
Lubricate all roller slots.
•
Tighten main spring.
Uneven or Torn Tape
•
Blade is dull. Replace blade.
• Tape tension is incorrect. Increase tension.
•
Clean and adjust blade.
•
Blade mounted incorrectly or backwards.
• Knife arm spring is worn. Replace knife arm
spring.
•
Adjust cartridge height.