eastern WL-1000, Инструкция пользователя

Страница: 15 / 16

㞏
#
Light off LAMP if possible as audio drop out is affected by LED.
㞏
#
L/OFF is set up to initial set up.
NOTE
1. Press L/ON button on the remote control.
㞏# Lighting ON continuously
2. Press L/OFF button on the remote control
㞏
#
Whenever pressing button of remote or WL-1000, LAMP is light on for approximately 10sec.
㞏# Lighting OFF continuously
㞏
#
Use MANUAL function only when there are too much interference.
㞏
#
AUTO channel is set up to initial set up.
NOTE
1. Press AUTO button of your remote control.
㞏
#
AUTO channel is set up to initial set up. NOTE
1. Press MANUAL button then AUTO LED is light off.
2. Press CH button
㞏
#
the channel shall be changed whenever pressing CH button (CH1 㞙 CH2 㞙 CH3)
3. Select one channel which the best one of 3 channels.
STAND BY
MANUAL CH. AUTO
L / ON L / OFF
INPUT
XY
㞔# Selecting AUTO channel
㞔#
Selecting MANUAL channel
㞔#
Light on and off for POWER LAMP
Edvlf#rshudwlrq
STAND BY
L /ON INPUT L /OFF
㞖
MANUAL CH.
AUTO
STAND BY
L /ON INPUT L /OFF
AUTO
MANUAL CH.