Eastern Voltage Research Advanced RGB LED 1.0 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 13

Eastern Voltage Research Advanced RGB LED 1.0 Скачать руководство пользователя страница 2

Advanced RGB LED 1.0 Kit

December 2013, Rev 1

− 2 −

http://www.EasternVoltageResearch.com

Advanced RGB LED 1.0 Kit

Introduction to the Advanced RGB LED 1.0 Kit

Thank you for purchasing the Advanced RGB LED 1.0 Kit.  This kit is a favorite of my
children.  Using a high power RGB LED controlled via a PIC12F683 microcontroller, a
wide array of colors and effects can be created with this kit.  Multiple brightness levels,
colors,  flashing  modes,  strobe  effects,  pulsing  effects,  and  fade  effects  are  pre-
programmed  into  the  PIC12F683  microcontroller  and  user  selectable  by  the  onboard
pushbutton.

As I previously stated, this kit is definitely one of my children’s favorites and I hope you
enjoy it too!

Notice  to  Beginners:    If  you  are  a  first  time  kit  builder,  you  may  find  this  instruction
manual easier to understand than expected.  Each component in this kit has an individual
check  box,  while  a  detailed  description  of  each  component  is  provided  as  well.    If  you
follow each step in the instruction manual in order, and practice  good soldering  and kit
building skills, the kit is next to fail-safe.

Please read this manual in its entirety before building, testing, or operating your kit!

«
1
2
3
4
...
»

Содержание Advanced RGB LED 1.0














Отзывы:

Нет отзывов