The Phoenix Forge Owner’s Manual
Warranty:
Your forge will be free of manufacturing defects or flaws for a period of 30 days. Modifications of any sort will
render this warranty null and void. Damage that is caused by misuse, inexperienced use, or dangerous use will
void warranty.
Should a defect be found we will replace the part at no cost to you during the first 30 days.
There are no refunds on used forges
Disclaimer:
Eastern Roadside Creations (E.R.C.) is not responsible for any damage, injury or accidental issue caused by
misuse of your forge or any of the parts of this product.
Always wear the proper Personal Protection Equipment (PPE) for forging whenever you are operating your
forge. Your forge will be appox 2300F inside the chamber and can cause serious injury if not used safely.
The edges on your forge can be sharp so please use the attached Carry Handle. The chamber is made from a
large plate and we use a laser to cut the initial shapes we will form. Laser cuts can leave sharp edges. Be
careful when transporting your forge using anything other than the attached handle.
Make sure your burner is securely placed in the burner port.
Your Burner must stay in the port while lit or it
can cause serious risk of fire or injury. If improperly placed your burner can fall out of the port. Be Safe!
Use your forge in a well-ventilated area. Burning gases produce fumes. You should not breathe these fumes.
Make sure you have proper air flow in your shop. Carbon Monoxide poisoning and exposure is a very serious
risk when forging in a poorly ventilated area.
If you are constantly forging or forge welding you should wear shaded goggles. Over time the light coming
from the center of the chamber can damage eyes with prolonged exposure. This is true of any forge.
Forges are an item that will experience wear and tear. At some point, nearly every forge will need a new
lining. Your forge should last many years without issue. Unfortunately, nothing we can build will last forever.
Your forge is made to be relined if needed.