background image

- 4 - 

3. OPERATING INSTRUCTIONS 

 

3-A.  General Measurement 

 

Insert the 

SENSOR 

(14) plug into the 

SENSOR INPUT 

(1) and turn the 

meter on by pressing the 

POWER 

(3) button. 

Remove the lens cap from the 

PHOTO SENSOR 

(15) . 

Select the desired unit of measure by pressing the 

LUX/FC 

(7) button. 

Select the maximum range by pressing the 

RANGE 

(9) button.  If the out 

of range indicator "- - - - " appears, select another range or discontinue 
use.  For the highest accuracy, select the range that offers the highest 
resolution (most number of digits after the decimal point). 

Point the 

PHOTO SENSOR 

(15) toward the source and read the  

results on the display. 

The instrument has an automatic shut off function in order to prolong  
battery life.  After approximately 10 minutes without activity (no buttons 
pushed), the meter will automatically shut off.  To disable this feature, 
press the 

REC MAX/MIN 

(5) button. 

Press the 

POWER 

(3) button to manually turn the meter off.

 

 

3-B.  Hold 

 

During measurement, press 

HOLD 

(4) to freeze the measured value.   

"HOLD" and the value are displayed. 

Press the 

HOLD 

(4) button again to exit

.

 

 

3-C.  Peak Hold 

 

During measurement, press the 

HOLD 

(4) button for 2 to 3 seconds. 

“Peak HOLD” and the peak value are displayed and updated if exceeded.  

To erase the peak value, press the 

HOLD 

(4) button once (the display will 

flash). 

To exit this function, press the 

HOLD 

(4) button for at least 2 seconds. 

 

3-D.  Record Maximum / Minimum

 

 

Press the 

REC MAX/MIN 

(5) button once to enter the recording mode. 

"REC" and the recorded values are displayed and continuously updated. 

Press the 

REC MAX/MIN 

(5) button as needed to view the recorded Max 

and Min values.  "REC Max" and the maximum recorded value or "REC 
Min" and the minimum recorded value are displayed.  

Note: The Max/Min values are frozen and not updated until the meter  
returns to recording mode. 

To return to recording mode, press the 

HOLD 

(4) button. "REC" is  

displayed without "Max" or "Min". 

To erase the recorded Max/Min values and exit the recording mode, press 
the 

REC MAX/MIN 

(5) button for at least 2 seconds. 

Eastern Energy Co., Ltd.

 

40/4 Vitoondumri Rd., Banbueng

   

Banbueng, Chonburi, Thailand

 

 

Tel: 66-3844-6117

[email protected]

www.eastern-energy.com

www.eastern-energy.com

Содержание SPER SCIENTIFIC 840020









Отзывы: