4
10. Remove the MotoWinch. Inspect the loose parts for any damage and dirt. Clean the MotoWinch components before storing
them. In case of damage (except for minor scratching of the metallic surfaces), contact the supplier.
Note 1;
the underground under the rubber foot must be solid and free from loose gravel, oily substances and any other
influences which will adversely affect the grip of the rubber foot on the ground. This is entirely the responsibility of the user. When the
underground is very soft, muddy or marshy, use the (optional) load spreader foot plate to spread the load
. Always put your boot/foot
against the MotoWinch base to stabilize it and prevent it from slipping away.
REMARK;
On some motorbikes the handlebars are mounted in rubbers in the tri-plate. After putting the bike back on its wheels, it can be
that the handle bars are slightly skewed. This is not a problem and the handle bars/rubbers can easily be straightened again by putting the
front wheel against a solid object like a wall or a pole or by turning the handlebars to the maximum steering angle and push or tap it back to
the wright position.
6. Maintenance.
After use, remove the sand and mud of all parts. Regularly check the O-rings of the couplings. Although they are not essential
to the safe operation of the MotoWinch, these are important for the convenient use of the winch. Grease the O-rings
occasionally sparsely with acid-free petrolatum, chain grease/oil or normal bearing grease. Wipe excess grease off. When the
O-ring are completely dry, assembly and disassembly of the coupling will be difficult. Regularly check the strap. When the
strap is damaged (except for mild fraying of the edges) or torn, it must be replaced. If the stitching of the loop is damaged, the
strap must be replaced. Regularly check that all bolts and nuts tight. Carefully clean all parts and replace damaged parts with
new ones.
•
Replacement O-rings;
20mm connections 15,60mm x 1,78mm. NBR or equivalent
14mm connections 10,82mm x 1,78mm. NBR or equivalent
Nothing in this publication may be reproduced and / or made public by print, photocopy, microfilm or any other means without the prior written
permission of the publisher. Technical data may be changed without prior notice. Eastbound is not responsible / liable for damage / personal
injury due to (incorrect) use of this product. Eastbound is interested in your comments and about this products and manual.
www.eastbound.org
[email protected]
