19
then automatically return to the original display .
Simulating Thermocouples also have two kinds of cold end temperature compensation,
automatic and manual compensation.The
method of operation is same to
using
thermocouple,
please refer to 4.1
section
for specific operation.
5.2 Application of Resistance Temperature
Detector (RTD)
Connect the calibrator and the instrument to be tested according to the Figure 5.2-1.
Simulation of RTD should be based on the following steps:
1. If necessary, press
to select
mode.
2. Press
to select RTD graduation.
3. Press
or
to select temperature. Press
or
to select digit.
Figure 5.2-1
Sensor terminal of transducer
