Parameter setting interface operation instructions
:
1.Select the operation by turning the
knob; 2. Switch settings by pressing the Enter key for non-numeric parameters; 3. For numeric par
ameters, press the Enter key to enter editing mode, select the corresponding digits by the direction
key, then rotate the knob to adjust the value, [Enter] or [Esc] key to exit the editing; 4. Press the [E
sc] to return to the next level Interface.
Figure 2.14.1 qualification test setup interface
Fig. 2.14.2 opening the interface after qualification test
2.15 Other system settings
2.15.1 Keyboard lock function
In order to prevent user misoperation, the load also adds locking function. The title bar
displays the lock identification. In the locked state, all keys, including knobs, are locked except for
the[ On/Off], [Enter,] [Shift]+ [
▶
] keys. In addition, in the lock state, the lock bar will appear in
the icon bar, and the icon will disappear when the lock is unlocked. Long press [Enter] key 3S can
switch in lock and unlock state.
20