key, and then adjust the value by a rotary knob, [Enter] or [Esc] key to exit editing. 3. press the cor
responding [On/Off ]startup mode.
Fig. 2.4.4 mode of constant power measurement
2.4.5 Constant current transfer voltage measurement mode
Constant current transfer voltage measurement mode is designed to prevent damage caused by
overcurrent discharge. In this mode, when the current value set by the load cannot be output by the
source to be measured, the current mode will be automatically switched from the constant current
mode to the constant voltage mode.
Operation description
:
1.Select the operation item by rotating the knob. 2. set parameters.
Press the [Enter] key to enter editing mode, select the appropriate number of digits by the direction
key, and then adjust the value by a rotary knob, [Enter] or [Esc] key to exit editing. 3. press the cor
responding [On/Off] startup mode.
Fig. 2.4.5 constant current transfer voltage measurement mode
2.4.6 Constant voltage transfer voltage measurement mode
Constant voltage transfer voltage measurement mode is designed to prevent damage caused b
y overcurrent discharge. In this mode, when the source cannot output enough current to maintain t
9