![background image](http://html1.mh-extra.com/html/east-tester/et-1714/et-1714_user-manual_522212015.webp)
12
5 Simulating Thermocouples
(TC)
Connect calibrator input/output terminal to the instrument to be tested using
thermocouple. The connecting diagram is shown below, Proceed as follows to simulate
a thermocouple:
1.
Connect thermocouple to the TC input/output plughole of calibrator as shown in
Figure 5-1.
2.
If necessary, press
to select
mode.
3.
Press
to select thermocouple function. If necessary, continue pressing the
key to select thermocouple graduation.
4.
Press
or
to select temperature. Press
or
to select digit.
Figure 5-1
Содержание ET-1714
Страница 3: ...10 Warning 19...