![background image](http://html1.mh-extra.com/html/east-tester/et-1714/et-1714_user-manual_522212012.webp)
9
3 Function Usage
3.1 DC V Measurement
The default function of the calibrator after start-up is voltage measurement. If it is
required, press
to re-select the voltage measurement (the display unit is
V).Please connect the lines after all functions are selected. The connection mode and
interface are shown in Figure 3.1-1:
Figure 3.1-1
3.2 DC mV Measurement
Press
to re-select the DC mV function (the display unit is mV), the connection
mode is same to voltage measurement.
3.3 DC mV Source
Press
and
to select the DC mV output , the connection mode is same to
that of voltage measurement. When the mill-volt is overload, there is sign of
,
Содержание ET-1714
Страница 3: ...10 Warning 19...