※
Be sure to install it securely, otherwise it may fall off and cause
injury or malfunction
Chair Installation
Step two
3, After the installation of the inner panel is completed, install the outer
panel should push the fixed latch firstly from front to back, then use
3.5x16 round head pointed tail lock.
3.5x16 round head pointed tail
sliding direction
Step Three
4, When installing the upper cover of the left armrest, install the hand
controller bracket first, and then slide into the fixed mortise.
5, After positioning, 2 armrest cover screws (M4x25) are locked on the
front and ends from bottom to top.
The side plate assembly is a mother side buckle
From inside to outside, buckle the male
side and the mother side to the bottom
sliding direction
Armrest cover screws(M4x25)
From inside to outside, buckle the common side
and the mother side to the bottom
Attention
10
