to adjust the figure. Setting ar modification is effective only
by pressing OK button to make confirmation.
@TIME ON: Far time ON setting. Once pressing this button,
the time will increase by 0.5 hour. When the set time exceeds
1 O hours, pressing the button will increase the time by 1 hour.
Adjusting the figure to 0.00 will cancel time ON setting.
®TIME OFF: Far time OFF setting. Once pressing this button,
the time will increase by 0.5 hour. When the set time exceeds
10 hours, pressing the button will increase the time by 1 hour.
Adjust the figure to 0.00 will cancel time ON setting.
@ RESET (inner located): Press this button with a needle of
1 mm to cancel the current setting and reset remate controller.
@ LOCK (inner located): Press this button with a needle of
1 mm to lock ar unlock the current setting.
@ OK: Used to confirm the time setting and modification.
®COOL/HEAT (inner located): Press this button with a needle
of 1 mm to shift mode between COOL only and COOL&HEAT.
During setting, back light will be lightened. Factory default
mode is COOL &HEAT.
@ ECO: Actívate ar turn off economic operation mode. lt is
suggested to turn on this function when sleeping. (Only
available when remate controller is used with corresponding
unit.)
4
V.2
