MAINTENANCE
If you cannot deal with the problems by yourself and need help:
•
Press the On/Off button.
•
Pull out the mains plug and call the service.
！
Warning!
•
Clean lint filter and heat exchanger.
•
Empty the water container.
•
Check the drain hose.
•
Check installation place is appropriate.
•
Keep the air inlet clean.
•
Use higher drying intensity level
programme or time programme.
“Ful” is lighting
“ ”is lighting
Problem
Solution
Display is not on
•
Check if the power supply works.
•
Check if the mains plug is inserted.
•
Check the selected programme.
•
Press the On/Off button.
•
Check the water container. If it's full,
please pour out the condensate water
and restart the dryer. If the container is
not full, please restart the dryer directly.
•
If the “ful“ icon is still lighting after you
have finished the first two steps, please
call the service.
•
Clean the lint filter.
Dryer does not start
•
Connect the tumble dryer to the mains.
Turn on the tumble dryer.
•
Check that the door is closed.
•
Check the programme is set.
•
Press the
Inicio/Pausa
button.
Degree of dryness
was not reached or
drying time too long
There are humming
noises
•
The compressor is operating. These noises
are quite normal and do not indicate a fault.
The dryer switches
off at the end of the
programme
•
The dryer switches off automatically for
energy saving. This is not an error but a
normal function.
26
V.1