4. Install the hinge shaft and shaft sleeve to the left hole of the lower hinge, and
then the lower hinge to the left corner of the refrigerator, then adjusting foot A
according to the position shown in the Figure, and finally the adjusting foot B to
the right lower corner of the refrigerator.
5. Dismantle the stoppers, sleeve pipes of both refrigerator and freezer door,
install them on the other side of both doors. Exchange the installation
position of sleeve pipe and hole cap on upper end cap of refrigerator door.
Remove the left decorative cover of freezer door, and move the sleeve pipe.
6. Install the refrigerator compartment door on the lower hinge and then
install the middle hinge, screws and caps.
Sleeve
Adjusting foot A
Adjusting foot B
Lower hinge
Adjusting foot A
Adjusting foot B
Hole cap
sleeve pipe
Left decorative cover
Right decorative cover
Self-locking
of left door
Self-
locking
of right door
Door stop
Support
block
V.1
12