Commissioning
4.
3.2
3.3
Step 1
Step 2
Step 3
Unscrew the swivel nut from
the threaded sleeve,
then thread the swivel nut and
threaded sleeve over
the AC cable
Insert the conductor into a suitable ferrule
acc. to DIN 46228-4 and crimp.
Insert the crimped conductors, L, N and PE
into corresponding terminals and tighten
the screws (torque 0.6±0.1N·m).
Assemble the locking cap,
threaded sleeve and swivel
nut together.
Screw the AC connector and
tighten firmly into socket.
Approx. 60mm
For “L1” , “L2”,“L3”and “N”
7-9mm
4....6mm²
φ
12
-1
8
m
m
Approx. 65mm
1
2
1
2
L
N
PE
DC Wire Assembly and Connection
Note: According to AS/NZS 5033, PV arrays for installation on domestic
dwellings shall not have PV array maximum voltages greater than 600V.
1
）
Wi-Fi/GPRS Connection
(Optional)
3.4
The stick is included in the scope of delivery as an option.
3.4.1 Tighten the stick into the COM1 port. Make sure the stick is
securely connected.
3.4.2 For the connection and configuration of the Wi-Fi stick please refer to
<Wi-Fi stick User manual> .
2
1
1
3.5
RS485/Smart Meter/DRED Connection
Step 1
DRED
Meter
R 485
S
DRED
Meter
R 485
S
DRED
METER
RS485
or
or
Ap
pr
ox
.6
0m
m
Step 2
Step 3
B
A
1
2
screwdriver type: Blade 0.4 x 2.5
RS485/METER connection
Connect the crimped cables to RS485 / Meter terminals/
DRED
and secure by (blade 0.4x2.5) screwdriver
123 4 5 6 78
Pin1:DRM1/5
Pin2:DRM2/6
Pin3:DRM3/7
Pin4:DRM4/8
Pin5:RefGen
Pin6:Com/DRM0
Pin7:N/A
Pin8:N/A
1
8
D
RED
connection
R 45 Plug
J
R 45 Plug
J
Step 4
T
ighten
the
nut
to
prevent
the
cable
from
wobbling,
p
ut on the COM
2
sealing plate and
firmly tighten the screws .
(Screwdriver type: T25; Torque: 2.5 Nm)
1
2
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
click
click
10
7mm
7mm
PV1-F/UL-ZKLA/USE2
PV1-F/UL-ZKLA/USE2
Assemble the connectors
2.6-2.9 N·m
Positive
Negative
Assemble the
cable ends
D4
Positive terminal
Negative terminal
Crimp pliers to cable ends
Note: Don't crimp this part!
Assemble the
cable ends
MC4
Positive terminal
Negative terminal
www.
easelectric.es
EAS ELECTRIC SMART TECHNOLOGY, S.L.
Address:
P.I. Codonyers, C/Principal, 4 46220 Picassent (Valencia, SPAIN)
