EAS Electric EBP08WZR, Инструкция по эксплуатации, Страница: 66 / 98

14
6.3.2 Set Temperature
When heat pump is on,short-press or into water temperature setting surface. Water in area
t emperature value twinkles,press or to select value,press to confirm and exit current
setting.No any set up after 30 seconds,the controller will save the last setting and go back to original surface.
6.3.3 Set Parameter
When heat pump is on,Long-press into memu,
%
displays Parameter Query,press or
select among Parameter Query/Parameter Setting/Debugging Status/History Fault.Short-press to
confirm your selction and switch to ,press or select, displays the value.
When on status of Parameter Setting , and display two
“
88
”
,it is asking you to enter your
password, press and to select,press to confirm.When password is right, displays
Parameter No. Displays related parameter value.
When on status of Debugging , displays the Number, 01 water pump debugging, 02 testing mode, and
displays ON or Off. The related mode symbol twinkles after entering into testing mode.
6.3.4 Display on each status:
Parameter Query Parameter Setting Debugging Status Error Query
Note
：
Value twinkles,means it is available for changing,or in verse
6.4 Function Diagnosis
When Heat Pump is off, Dial 4 switches to 1, give the heat pump power into status of function diagnosis automatically.
Then display will show each symbol and change every 1 second.
V.2