Cancel
O K
By remote control:
By keyboard:
By RFID card:
By remote SMS:
By APP:
The alarm host reminder:
press
【 】
key to activate Out Arm.
In Main Interface, press to activate Out Arm.
In Disarm mode, put the RFID card close to the sensitive area on
bottom right corner of the alarm host.
Send SMS message 1234#1
（
1234 is user password) at first, then
the alarm host will feedback “System Armed!
SMS to mobile phone to confirm.
In Main Menu, select “
icon, then select delay arm time(exit delay).
After around 3 seconds, Out Arm mode is completed.
A reminding voice “System armed” will be heard, the
Main Interface displays “Armed” and “Please exit”, and an exit time progress bar
appears. The user should leave the alarm zone before exit time. If Arm/Disarm SMS
switch is on,the preset phone will receive “S
ytem
Armed
!”
SMS.
”
”
T h e u s e r c a n c o n t r o l t h e a l a r m h o s t b y a n y o f f o l l o w i n g w a y s
：
R e m o t e c o n t r o l , K e y b o a r d , R F I D c a r d
.
R e m o t e S M S
.
M o b i l e p h o n e A P P.
G P R S a l a r m c e n t e r
.
2
1
3
Under Out Arm mode, all defense zones are on alert status. If any defense zone is
triggered, the alarm host will generate a local siren alarm, and send alarm SMS or make
calling to the preset phone numbers , simultaneously send the alarm message to mobile
phone APP or GPRS alarm center.
!
ARM/
*
In Main Interface, press key to make calling.
Please operate according to the hint in this interface.
!
23
22
Phone function
In case of following condition, No GSM network, in Arm mode, on alarm, making a call
is forbidden.
Daily operation
Out Arm
Refer to below diagram:
10086
10086
PHONE FUNCTION
DAILY OPERATION
On-time status
of alarm host
