1 SV33 Microphone
1 Pivot Arm
1 Cherry-Wood Box
YOUR PURCHASE INCLUDES
Thank you for purchasing the
Earthworks SV33 Studio Condenser Microphone!
Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a
baseline understanding of how our microphones sound, and will then be able to adjust accordingly.
Begin by removing all included components from the packaging. Make sure to mute any incoming
signal to speakers or headphones to avoid any loud “pops” when connecting.
Connect the microphone to an audio interface supplying 24-48V phantom power using a standard
XLR cable. Because of the microphone’s larger capsule size, please allow one minute for the
microphone to settle.
To guarantee your microphone provides years of performance, follow these guidelines:
• Avoid extreme heat and condensing humidity.
• Rough handling may damage the microphone even if no markings are visible.
• When not in use, keep the microphone in its case.
GET TING STARTED
SPECIFICATIONS
SV33
Frequency Response
30Hz - 33kHz
Polar Pattern
Cardioid
Sensitivity
10mV/Pa (-40dBV/Pa)
Power Requirements
24-48V Phantom, 10mA
Peak Acoustic Input
145dB SPL
Output
XLR (Pin 2+)
Minimum Output Load
600Ω, balanced between pins 2 & 3
Noise
20dB SPL (A weighted)
Dimensions
Length: 8.32 inches (211.32mm)
Max dia.: 1.97 inches (50mm)
Min dia.: .860 inches (22mm)
Weight
2.5lb (1.13kg)
WARR ANT Y
All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: [email protected].
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
37 Wilton Rd. Milford, NH 03055
(603) 654-2433
earthworksaudio.com
© 2022 Earthworks, Inc
If you encounter issues while using your Earthworks Audio microphone, please make sure that:
• Your microphone is connected to an active power supply.
• Phantom power is being supplied to the microphone.
• Your microphone and XLR cable are well connected.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
PROPER MAINTENANCE
