To assemble the FW730TPB, first screw the metal
sleeve onto the threads on the bottom of the
FlexWand until the metal sleeve is screwed on tight.
Then pick up the FlexWand by holding the stand
section or the XLR section and insert the metal sleeve
into the hole on the tripod base. Push the sleeve all the
way down and then tighten the setscrew.)
PROPER MAINTENANCE
To guarantee your microphone provides years of
performance, follow these guidelines<
5 Avoid touching the front protective screen.?
5 Never attempt to disassemble the microphone.?
5 Avoid extreme heat and condensing humidity.
Allow the microphone to warm up when bringing it
in from the cold.?
5 Rough handling may damage the microphone
even if no markings are visible.
IMPORTANT NOTICES
The small tip on many of our microphones allows them
to capture the highest frequencies of your sound.
Please be gentle and considerate when handling the
microphones with these tips. (Microphones such as the
SR314 and SR40V shield the tip within their capsule,
and are thus more durable.)
Please do not excessively bend the Flexwand beyond
90 degrees. Doing so on a consistent basis will cause
the wand portion to deteriorate and lose its ability to
stay in the desired position.
FW 730
Microphone System
