background image

TO REDUCE RISK OF INJURY: 

Before any use   

be sure everyone using this product reads and    
understands all safety instructions and other        
information contained in this manual. 

CAUTION: 

Wear appropriate personal hearing    

protection during use.  Under some conditions     
and duration of use, noise from this product may        
contribute to hearing loss. 

Save these instructions and review frequently prior 
to  use and in instructing others. 

WARNING: 

When using electric appliances, 

basic safety precautions should always be followed 
to reduce risk of fire, electric shock, and personal   
injury, including the following: 

READ ALL INSTRUCTIONS

  

CHECK FOR DAMAGED PARTS - Before further use 
of the product, any part that is damaged should be 
carefully checked to determine that it will operate   
properly and perform its intended function. Check for 
alignment of moving parts, binding of moving parts, 
breakage of parts, mounting and any other condition 
that may affect its operation. Any part that is damaged 
should be properly repaired or replaced. For assistance 
call our customer service help line at 1-800-633-1501. 
 
AVOID DANGEROUS ENVIRONMENTS - Do not   
operate in gaseous or explosive atmospheres. Motors 
in these products normally spark, and the sparks might 
ignite fumes. 
 
KEEP CHILDREN AWAY - All visitors, children and 
pets should stay at a safe distance from the work area. 
 
DRESS PROPERLY- Don’t wear loose clothing or   
jewelry and wear protective hair covering to contain 
long hair. They can be caught in moving parts.    
 
Wear safe, sturdy, nonskid footwear. Maintain good 
footing at all times, especially on slopes. 
 
USE SAFETY GLASSES - Wear safety glasses with 
side shields or goggles that are marked to comply with 
ANSI Z87.1 standard when operating this product.   
 
DOUBLE INSULATION – The snow thrower has double 
insulation.  This means that all external metal parts are 
insulated from the electrical supply. This is achieved by 
introducing an insulation layer between electrical and 
mechanical parts. The double insulation guarantees 
you the greatest possible safety. 
 

WARNING: 

Use outdoor extension cords marked 

SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or 
SJTOWA.  These cords are rated for outdoor use and 
reduce the risk of electric shock.  
 
POLARIZED PLUGS-To reduce the risk of electric 
shock, this product has a polarized plug. Polarized  
connections will fit together only one way

.

Make sure 

that the receptacle end of the extension cord has large 
and small blade slot widths. If the plug does not fit fully 
into the extension cord, reverse the plug. If it still does 
not fit, obtain a suitable extension cord. If the extension 
cord does not fit fully into the outlet, contact a qualified 
electrician to install the proper outlet. Do not change 
the plug on the tool or the extension cord in any way. 

EXTENSION CORD. Make sure your extension 
cord is in good condition. When using an extension 
cord be sure it is heavy enough to carry the current 
your product will draw. An undersized extension 
cord will cause a drop in line voltage resulting in 
loss of power and overheating. The following table 
shows the correct size to use depending on cord 
length and nameplate ampere rating. If in doubt, 
use the next heavier gage. The smaller the gage 
number, the heavier the cord. 

 
 
 
 
 
 
 
 
 
 

 

It is possible to tie two extension cords together in 
a knot to prevent them from 
becoming disconnected during 
use. Make the knot as shown, 
then connect the plug end of 
the power cord into the recepta-
cle end of the extension cord. 
This method can also be used   
to tie two extension cords together. 
 
Use one of the plug-receptacle retaining straps or  
connectors described in this manual. 
 

WARNING: 

Keep all connections dry and off the 

ground. Do not touch plug with wet hands. Failure 
to do so can result in serious personal injury or 
death.

 

 
Be aware of the extension cord while operating the 
snow thrower. Be careful not to trip on the cord. 
Always keep the cord away from the auger. 

    

IMPORTANT SAFETY WARNINGS

 

GENERAL SAFETY

 

Model SN75022 

Minimum Gage for Cord Sets

 

  

    Volts                      Total Length of cord in Feet

 

  

    120V                 0-25      26-50     51-100     101-150 
     

   Ampere Rating  
    More

  

Not More               American wire Gage 

    Than       Than 
      0      -      6      18           16             16            14 
      6      -    10      18           16             14            12 
     10     -    12      16           16             14            12 
     12     -    16      14           12        Not Recommended

 

 

Содержание SN75022

















































Отзывы: