background image

TO REDUCE RISK OF INJURY: 

Before any use   

be sure everyone using this product reads and    

understands all safety instructions and other        

information contained in this manual. 

CAUTION: 

Wear appropriate personal hearing    

protection during use.  Under some conditions     

and duration of use, noise from this product may        

contribute to hearing loss. 

Save these instructions and review frequently prior 

to  use and in instructing others. 

WARNING: 

When using electric appliances, 

basic safety precautions should always be followed 

to reduce risk of fire, electric shock, and personal   

injury, including the following: 

READ ALL INSTRUCTIONS

  

CHECK FOR DAMAGED PARTS - Before further use 

of the product, any part that is damaged should be 

carefully checked to determine that it will operate 

properly and perform its intended function. Check for 

alignment of moving parts, binding of moving parts, 

breakage of parts, mounting and any other condition 

that may affect its operation. Any part that is damaged 

should be properly repaired or replaced. For assistance 

call our customer service help line at 1-800-633-1501. 

 

AVOID DANGEROUS ENVIRONMENTS - Do not   

operate in gaseous or explosive atmospheres. Motors 

in these products normally spark, and the sparks might 

ignite fumes. 

 

KEEP CHILDREN AWAY - All visitors, children and 

pets should stay at a safe distance from the work area. 

 

DRESS PROPERLY- Don’t wear loose clothing or   

jewelry and wear protective hair covering to contain 

long hair. They can be caught in moving parts.    

 

Wear safe, sturdy, nonskid footwear. Maintain good 

footing at all times, especially on slopes. 

 

USE SAFETY GLASSES - Wear safety glasses with 

side shields or goggles that are marked to comply with 

ANSI Z87.1 standard when operating this product.   

 

DOUBLE INSULATION – The snow thrower has double 

insulation.  This means that all external metal parts are 

insulated from the electrical supply. This is achieved by 

introducing an insulation layer between electrical and 

mechanical parts. The double insulation guarantees 

you the greatest possible safety. 

 

WARNING: 

Use outdoor extension cords marked 

SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A, or 

SJTOWA.  These cords are rated for outdoor use and 

reduce the risk of electric shock.  

 

POLARIZED PLUGS-To reduce the risk of electric 

shock, this product has a polarized plug. Polarized  
connections will fit together only one way

.

Make sure 

that the receptacle end of the extension cord has large 

and small blade slot widths. If the plug does not fit fully 

into the extension cord, reverse the plug. If it still does 

not fit, obtain a suitable extension cord. If the extension 

cord does not fit fully into the outlet, contact a qualified 

electrician to install the proper outlet. Do not change 

the plug on the tool or the extension cord in any way. 

EXTENSION CORD. Make sure your extension 

cord is in good condition. When using an extension 

cord be sure it is heavy enough to carry the current 

your product will draw. An undersized extension 

cord will cause a drop in line voltage resulting in 

loss of power and overheating. The following table 

shows the correct size to use depending on cord 

length and nameplate ampere rating. If in doubt, 

use the next heavier gage. The smaller the gage 

number, the heavier the cord. 

 

 

 

 

 

 

 

 

 

 

 

It is possible to tie two extension cords together in 

a knot to prevent them from       

becoming disconnected during 

use. Make the knot as shown, then 

connect the plug end of the power 

cord into the receptacle end of the 

extension cord. This method can 

also be used to tie two extension cords together. 

 

Use one of the plug-receptacle retaining straps or  

connectors described in this manual. 

 

WARNING: 

Keep all connections dry and off the 

ground. Do not touch plug with wet hands. 

 

Be aware of the extension cord while operating the 

snow thrower. Be careful not to trip on the cord. 

Always keep the cord away from the auger. 

    

IMPORTANT SAFETY WARNINGS

 

GENERAL SAFETY

 

Model SN75018 

Minimum Gage for Cord Sets

 

  

    Volts                      Total Length of cord in Feet

 

  

    120V                 0-25      26-50     51-100     101-150 

     
   Ampere Rating  

    More

  

Not More               American wire Gage 

    Than       Than 
      0      -      6      18           16             16            14 

      6      -    10      18           16             14            12 

     10     -    12      16           16             14            12 

     12     -    16      14           12        Not Recommended

 

 

Содержание SN75018

















































Отзывы: