background image

TO REDUCE RISK OF INJURY: 

Before any use   

be sure everyone using this product reads and    
understands all safety instructions and other       
information contained in this manual.

 

CAUTION: 

Wear appropriate personal hearing    

protection during use.  Under some conditions     
and duration of use, noise from this product may  
contribute to hearing loss.

 

Save these instructions and review frequently prior 
to  use and in instructing others.

 

WARNING: 

When using electric appliances, basic 

safety precautions should always be followed to 
reduce risk of fire, electric shock, and personal   
injury, including the following:

 

READ ALL INSTRUCTIONS

 

CHECK FOR DAMAGED PARTS 

-

 Before further 

use of the product, any part that is damaged should 
be carefully checked to determine that it will operate 
properly and perform its intended function.  Check 
for alignment of moving parts, binding of moving 
parts, breakage of parts, mounting and any other 
condition that may affect its operation.  Any part that 
is damaged should be properly repaired or replaced.  
For assistance call our customer service help line at 
1

-

800

-

313

-

5111.

 

AVOID DANGEROUS ENVIRONMENTS 

-

 Don’t 

use this product in rainy or stormy conditions. Do 
not operate in gaseous or explosive atmospheres.   
Motors in these products normally spark, and the 
sparks might ignite fumes.

 

KEEP CHILDREN AWAY 

-

 All visitors, children and 

pets should stay at a safe distance from the work 
area.

 

DRESS PROPERLY

-

 Don’t wear loose clothing or 

jewelry and wear protective hair covering to contain 
long hair.  They can be caught in moving parts.   

 

Wear rubber boots when operating the snow   
thrower. Maintain good footing at all times,       
especially on slopes.

 

USE SAFETY GLASSES 

-

 Wear safety glasses  

with side shields or goggles that are marked to  
comply with ANSI Z87.1 standard when operating 
this product.  

 

WARNING: 

Keep hands away from moving parts. 

Never put your hands near the auger to remove 
snow, sticks or other debris. Blocked auger can 
“spring back” when cleared and may cause personal 
injury even when the snow thrower is stopped.    
Always use a wooden stick such as a broom handle 
to clear blockages.

 

REMOVE THE BATTERY from the snow thrower 
when not in use or when servicing or cleaning.  Do 
not leave unattended.

 

USE RIGHT APPLIANCE 

-

 Do not use this product 

for any job except that for which it is intended.

 

Avoid Accidental Starting—Don’t carry snow thrower 
with finger on switch when the battery is installed. 
Be sure switch is off when installing battery.

 

DO NOT FORCE SNOW THROWER 

-

 It will       

perform better and safer at the rate for which it  
was designed.

 

DON’T OVERREACH 

-

 Guide the snow thrower at a 

walking pace only. Keep proper footing and balance 
at all times. 

 

LIGHTING 

-

 Only operate your snow thrower in 

daylight or good artificial light.

 

STORE IDLE UNIT INDOORS

-

When not in use, the 

snow thrower should be stored indoors in a dry area 
out of children’s reach.

 

MAINTAIN UNIT WITH CARE

-

Keep clean for best 

performance and to reduce the risk of injury. Inspect 
extension cord periodically and replace if damaged.  
Keep handles dry, clean and free from oil.

 

Do not operate the snow thrower on a slope that is 
too steep for safe operation. When on slopes, slow 
down and make sure you have good footing.

 

Before starting the snow thrower make sure the  
auger is not touching any object and is free to move.

 

Do not use on graveled surface unless the snow 
thrower is adjusted for such a surface in accordance 
with the operator’s manual.

 

Operation of the show thrower in the hand

-

held   

position is unsafe, except in accordance with the 
special instructions for such use provided in the   
operator’s manual.

 

CAUTION:

 Never throw snow towards people, pets 

or cars and never allow anyone in front of the snow 
thrower while in operation.

 

Objects that might clog the snow thrower or cause 
other damage can be hidden in the snow.  Clear the 
area of doormats, sleds, boards, wires and other 
debris prior to use.

 

If the auger strikes a foreign body, examine the 
snow thrower for signs of damage and make any 
necessary repairs before restarting and continuing 
to work.

 

STAY ALERT 

-

 Watch what you are doing. Use 

common sense.  Do not operate the snow thrower 
when you are tired or under the influence of drugs, 
alcohol or medications.

 

IMPORTANT SAFETY WARNINGS

GENERAL SAFETY

 

3

 

Содержание SN74016

















Отзывы: