Page 4
SAFETY RULES FOR CHARGER
Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
Use of an attachment not recommended or sold by the battery
charger manufacturer may result in a risk of fire, electric
shock, or injury to persons. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury.
Do not service mower with battery, switch key, or charger
installed.
Do not use the charger when the ambient temperature is
above 45°C (113°F) or below -20°C (-68°F)
Do not operate charger with a damaged cord or plug which
could cause shorting and electric shock. If damaged, replace
the charger with an identical charger from an authorized
service provider.
Do not operate charger if it has received a sharp blow, been
dropped or otherwise damaged in any way. Take it to an
authorized service center for electrical check to determine if
the charger is in good working order.
Unplug charger from outlet before attempting any maintenance
or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use to
prevent damage to the charger during a power surge,
Risk of electric shock, Do not touch uninsulated portion of
output connector or uninsulated battery terminal.
Do not expose charger to wet or damp conditions, Water
entering charger will increase the risk of electric shock,
Make sure cord is located so that it will not be stepped on,
tripped over, come in contact with sharp edges or moving
parts or otherwise subjected to damage or stress. This will
reduce the risk of accidental falls, which could cause injury,
and damage to the cord, which could result in electric shock.
Keep cord and charger away from heat to prevent damage to
housing or internal parts.
Do not let gasoline, oils, petroleum-based products, etc. come
in contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
An extension cord should not be used unless absolutely
necessary. Use of improper extension cord could result in a
risk of fire and electric shock. If extension cord must be used,
make sure:
a.
That pins on plug of extension cord are the same
number, size and shape as those of plug on charger
b.
That extension cord is properly wired and in good
condition; and
c.
That wire size is large enough for AC ampere rating
of charger as specified below:
Cord length (Feet) 25’ 50’ 100’
Cord Size (AWG) 16 16 16
NOTE: AWG= American Wire Gauge
Save these instructions. Refer to them frequently and use
them to instruct others who may use this product. If you loan
someone this lawn mower, loan them these instructions also.
Clear the work area before each use. Remove all objects such as
rocks, sticks, wire, bones, toys, or other objects which can be
thrown by the blade. Stay behind the handle when the motor is
running.
Avoid holes, ruts, bumps, rocks or other hidden objects. Uneven
terrain could cause a slip and fall accident.
Do not mow near drop-offs, ditches, or embankments
Mow across the face of slopes, never up and down. Exercise
extreme caution when changing direction on slopes.
Plan your mowing pattern to avoid discharge of material towards
roads, sidewalks, bystanders and the like. Also, avoid discharging
material against a wall or obstruction, which may cause the
material to ricochet back toward the operator.
Do not pull the mower backward unless absolutely necessary if
you must back the mower away from a wall or obstruction first
look down and behind to avoid tripping.
Never direct discharged material toward anyone, Avoid
discharging material towards a wall or obstruction, Material
may ricochet back toward the operator. Stop the blade when
crossing gravel surfaces.
Objects struck by the lawn mower blade can cause severe
injuries to persons. The lawn should always be carefully
examined and cleared of all objects prior to each mowing.
If the lawn mower strikes a foreign object, follow these steps:
Stop the lawn mower and release the switch control bail
wire,
Remove the switch key
Thoroughly inspect the mower for any damage
Repair any damage before restarting and continuing to
operate the mower.
Stop the motor, remove the switch key, and wait until the blade
comes to a complete stop before unclogging the chute, The
cutting blade continues to rotate for a few seconds after the motor
is shut off. Never place any part of the body in the blade area until
you are sure the blade has stopped rotating,
If the mower should start to vibrate abnormally, stop the motor
and check immediately for the cause. Vibration is generally a
warning of trouble.
Service on the product must be performed by qualified repair
personnel only. Service or maintenance performed by unqualified
personnel could result in injury to the user or damage to the
product.
Use only identical replacement parts when servicing the product.
Use of unauthorized parts may create a risk of serious injury to
the user or damage to the product.
Do not place batteries near fire or heat. This will reduce the risk of
explosion and possible injury,
Do not open or mutilate battery(ies). Released battery fliud may
cause damage to the eyes, or skin. It may be toxic if swallowed.
If battery fluid contacts the skin, wash it off immediately with
water. Seek medical attention.
If battery fluid contacts the eyes, flush thoroughly and
immediately with water. Seek medical attention.
SPECIFIC SAFETY RULES
Содержание 60418
Страница 19: ......
