50 lb Commercial Spreader
with Side Spread Control
MODEL # 2150
ASSEMBLY INSTRUCTIONS
2150_MARCH2024
PAGE 1
Prior to assembly, you will
need the following tools:
Needle nose pliers
#2 Phillips screwdriver
Adjustable wrench or ½ʺ
box wrench
SIDE SPREAD CONTROL
Patent U.S. 10,993,368
Your EarthWay spreader includes a patented
feature to prevent fertilizer from being spread to
the left side. To activate this feature, slide the lever below
the hopper to the back (if standing behind the spreader)
and position the left wheel 6ʺ-12ʺ from your sidewalk or
border. While activated, the spreader will not waste
fertilizer like competitor designs. Competitor deflectors
leave 7X the fertilizer inside the wheels from blocking all
the material leaving the impeller.
ASSEMBLY HARDWARE
*You may receive more hardware than is needed for this
assembly process.
WARNING
ROCK SALT and POWDERED MATERIALS should not be used
in this spreader as it will damage the gearbox and can void
the warranty. Use only granular materials.
Agitator
QTY 2
1 1/2" Bolts
40mm Bolts
QTY 4
Philips
Screws
Hog Ring
QTY 3
1 3/4” Bolts
45mm Bolts
25mm
50 mm
40 mm
60 mm
70 mm
Bushing
QTY 6 – SS M6 Locknuts
QTY 5 – Zinc M6 Locknuts
QTY 2
2 1/8” Bolts
55 mm Bolts
Bearing
Spring Clip
QTY 6
2” Bolts
50MM Bolts
