65LB Professional
Ice Melt Spreader
MODEL # 90365
ASSEMBLY INSTRUCTIONS
90365Ice Melt Spreader_M52162 JULY 2021
PAGE 2
Assembly Steps
STEP 1:
Open carton and remove the handle assembly,
wheels, and spreader from carton.
STEP 2:
Turn spreader upside-down on to the hopper.
STEP 3:
Ensure that the axle bearings are pushed into the
axle bushing on both sides as shown. Install drive wheel
(both wheels are interchangeable) to axle using pin hole
nearest to lower handles as shown. Insert 2” cotter pin
through wheel and through axle. Bend with pliers to prevent
pin from falling out.
STEP 4:
Install coast wheel to axle, then using outside pin hole
as shown, insert 1” cotter pin through axle (not thru the
wheel). Bend with pliers to prevent pin from falling out.
GEARBOX &
AXLE ASSEMBLY
Lower
Handle
Frame
Brace
Cross Brace
Axle
Bearing
