background image

EarthWay

EarthWay

R

R





2040Pi-

P

lus

 

HIGH-OUTPUT

ASSEMBLY and OPERATING INSTRUCTIONS

5-Year LIMITED WARRANTY

Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a period of 5-years to the end user 

with the original purchase receipt for at home use.  If used for business, the warranty is 90-days.  If a manufacturing non-conformance 

is found, Earthway Products, Inc. at its discretion will repair or replace the part(s) or product at no charge provided the failure is not the 

result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by Earthway.  Earthway at its 

discretion may require that the part(s) or product be returned along with the original purchase receipt at owners’ expense for examination 

and compliance with the terms of this warranty.  Do not return any product without first receiving authorization from Earthway Products, 

Inc. To seek remedy under this warranty, contact Earthway Products, Inc. at 574-848-7491, [email protected] or write to Earthway 

Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and describe the nature of the manufacturing defect.  

SPECIFIC LIMITATIONS: 

This 

warranty covers only the part(s) or product; any labor charges associated with repair or replacement of non-conformances are specifically 

excluded.  Due to the corrosive nature of most fertilizers and ice melt products, Earthway Products, Inc. makes no warranty against and 

specifically excludes part(s) or product degradation or failure due to corrosion or its effects.  Clean and dry your spreader thoroughly after 

each use, as a preventative measure, coat all metal parts with a light oil or silicon spray.

Congratulations on the purchase of this new HIGH-OUTPUT spreader. Please call us if you have any difficulty with assembly 

or operation of this spreader.  We can be reached via the telephone at 800-294-0671 or 574-848-7491 Monday—Friday 

9:00am ~ 4:00pm or visit us online at www.earthway.com   This spreader comes with 

lifetime technical support

, email us at 

[email protected] if you have any questions.

HELPFUL HINTS: READ THE DIRECTIONS BEFORE ASSEMBLY

THIS SPREADER COMES PARTIALLY ASSEMBLED, REQUIRING YOU TO INSTALL THE CONTROL ROD AND WILL 

REQUIRE 1 PAIR OF PLIERS.

 

5

Your  spreader is designed to be pushed at three miles per hour, which is a brisk walking speed.  Slower or faster speeds will change 

the spread patterns.  

 

5

Prior to your first use, coat all metal parts (inside and outside tubing) with WD-40 or other spray lube to help prevent corrosion.  

 

5

Clean your spreader thoroughly after each use.  

Wash with clean water and dry thoroughly and spray a light coating of oil on all 

metal parts (inside all of the tubing) to help prevent corrosion.

 

5

Gears are permanently lubricated at the factory.  Do not open the gearbox or dirt may enter.

STEP 2:

Install Control Rod into 

handle as shown above.

TIP: 

Install the Control Rod

using pliers to squeeze into

Lever.

STEP 3:

Rotate forward.

STEP 4:

Insert Control

Rod into Pivot

and secure with

Hair Pin Clip.

STEP 1:

Remove spreader from carton and pull handle into

position shown at right. Tighten wingnuts to secure.

Assembly is complete.  Set the stop on the Control 

Assembly for the desired setting and your spreader 

is ready to operate.

ASSEMBLY INSTRUCTIONS

11-2018 Pt. #52214PIR

Отзывы: