EarthWalk eBuddy Series 3 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 99

EarthWalk eBuddy Series 3 Скачать руководство пользователя страница 3

eBuddy User Manual

-ii-

2/4/00

Copyright Notice

This manual, software and firmware described in it are copyrighted by their
respective owners and protected under the laws of the Universal Copyright
Convention. You may not reproduce, transmit, transcribe, store in a retrieval
system, or translate into any language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, biological, molecular, manual, or oth-
erwise, any part of this publication without the express written permission of
the publisher.

All products and trade names described within are mentioned for identification
purposes only. No affiliation with or endorsement of the manufacturer is made
or implied. Product names and brands appearing in this manual are registered
trademarks of their respective companies.

The information published herein has been checked for accuracy as of publish-
ing. No representation or warranties regarding the fitness of this document for
any use are made or implied by the publisher. We reserve the right to revise this
document or make changes in the specifications of the product described
therein at any time without notice and without obligation to notify any person
of such revision or change.

© 1999, EarthWalk Communications, Inc.

ebud.book Page ii Friday, February 4, 2000 11:11 AM

«
1
2
3
4
5
...
»

Содержание eBuddy Series 3




































































































Отзывы:

Нет отзывов