EarthStone WOOD FIRE OVENS Скачать руководство пользователя страница 19

Страница: 19 / 21

EARTHSTONE OVENS PRE-ASSEMBLED INSTALLATION INSTRUCTIONS--- ETL LISTED

IMPORTANT: PLEASE READ

BEFORE FIRING OVEN.

PRE-ASSEMBLED OVEN CURING

Pre-assembled ovens are pre-cured at the factory; however a two day curing process

is required before using the oven. Oven curing is a process of removing moisture

from the oven that has accumulated during the oven installation. This process

consists of two small fires; One fire each day for one hour, for a total of two days.

(You can also do one fire in the morning and one in the late evening) When curing,

each of the fires should lightly touch the dome of the oven. After one hour let the

fire burnout and close door. Do not be alarmed if the temperature gauge is not

moving, this is normal and is due to the moisture in the stone. If you still see

moisture from the oven you may need to cure the oven for a few more days.

Improper curing may cause small pieces of the oven to pop. Although this is not

harmful to the oven in anyway, please follow these procedures.

Содержание WOOD FIRE OVENS






















Результаты поиска

Содержание WOOD FIRE OVENS

Отзывы:

Бренды по названию

Популярные бренды

EarthStone WOOD FIRE OVENS, Руководство по установке

Результаты поиска

Содержание WOOD FIRE OVENS

Отзывы:

Бренды по названию

Популярные бренды